General
The ICS1893AF is a lower cost, re-packaged version of the ICS1893Y-10. The ICS1893AF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AF uses the same proven silicon as the ICS1893Y-10 but offers a lower cost solution by using a lower cost 300mil 48-lead SSOP package.

ICS1893AF Features
• Single 3.3V power supply
• Supports category 5 cables with attenuation in excess of 24dB at 100 MHz across a temperature range from - 5º to +85º C.
• DSP-based baseline wander correction to virtually eliminate killer packets across temperature range of -5º to +85º C.
• Low-power, 0.35-micron CMOS (typically 400mW)
• Single-chip, fully integrated PHY provides PCS, PMA, PMD and AUTONEG Sublayers of the IEEE Std.
• 10Base-T and 100Base-TX IEEE 8802-3 compliant
• Clock or crystal supported.
• Media Independent Interface (MII) supported.
• Managed or Unmanaged Applications
• 10M or 100M Half and Full Duplex Modes
• Auto-Negotiation with Next Page. Parallel detection for Legacy products.
• Fully-integrated, DSP-based PMD includes:
    - Adaptive equalization and baseline wander correction
    - Transmit wave shaping and stream cipher scrambler
    - MLT-3 encoder and NRZ/NRZI encoder
• Highly configurable supports:
    - Node applications, managed or unmanaged
    - 10M or 100M half and full duplex modes
• Loopback mode for Diagnostic Functions
• Small footprint 48-lead 300mil SSOP package.