74LVC126APW Datasheet - Philips Electronics
MFG CO.

Philips Electronics
DESCRIPTION
The 74LVC126A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, outputs can handle 5 V.
The 74LVC126A consists of four non-inverting buffers/line drivers with 3-state outputs (nY) which are controlled by the output enable input (nOE). A LOW at nOE causes the outputs to assume a high-impedance OFF-state.
FEATURES
• 5 V tolerant inputs/outputs for interfacing with 5 V logic
• Wide supply voltage range from 1.2 to 3.6 V
• CMOS low power consumption
• Direct interface with TTL levels
• Inputs accept voltages up to 5.5 V
• Complies with JEDEC standard no. 8-1A
• ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000 V
MM EIA/JESD22-A115-A exceeds 200 V.
• Specified from −40 to +85 °C and −40 to +125 °C.
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
Part Name
Description
View
MFG CO.
Quad buffer/line driver with 5-volt tolerant inputs/outputs (3-State)
Philips Electronics
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
Nexperia B.V. All rights reserved
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
Nexperia B.V. All rights reserved
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
NXP Semiconductors.
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
Nexperia B.V. All rights reserved
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state ( Rev : 2013 )
Nexperia B.V. All rights reserved
Octal buffer/line driver with 5-volt tolerant inputs/outputs (3-State)
Philips Electronics
Quad buffer/line driver with 5 V tolerant inputs/outputs; 3-state
Nexperia B.V. All rights reserved
Octal buffer/line driver with 5-volt tolerant inputs/outputs (3-State)title
Philips Electronics
10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State)
Philips Electronics