Part Name
74HCT173D
Other PDF
PDF
page
17 Pages
File Size
273.4 kB
MFG CO.
Nexperia B.V. All rights reserved
74HCT173D Datasheet - Nexperia B.V. All rights reserved
Nexperia B.V. All rights reserved
General description
The 74HC173; 74HCT173 is a quad positive-edge triggered D-type flip-flop. The device features clock (CP), master reset (MR), two input enable (E1, E2) and two output enable (OE1, OE2) inputs. When the input enables are LOW, the outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on either input enable will cause the device to go into a hold mode, outputs hold their previous state independently of clock and data inputs. A HIGH on MR forces the outputs LOW independently of clock and data inputs. A HIGH on either output enable pin causes the outputs to assume a high-impedance OFF-state. Operation of the output enable inputs does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Features and benefits
• Complies with JEDEC standard no. 7A
• Input levels:
• For 74HC173: CMOS level
• For 74HCT173: TTL level
• Gated input enable for hold (do nothing) mode
• Gated output enable control mode
• Edge-triggered D-type register
• Asynchronous master reset
• ESD protection:
• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
• Specified from -40 °C to +85 °C and -40 °C to +125 °C
Share Link: 