74ALVC162834A Datasheet - NXP Semiconductors.
MFG CO.

NXP Semiconductors.
General description
The 74ALVC162834A is an 18-bit registered driver.
Features and benefits
• Wide supply voltage range from 1.2 V to 3.6 V
• CMOS low-power consumption
• Direct interface with TTL levels (2.7 V to 3.6 V)
• Current drive ± 12 mA at 3.0 V
• MULTIBYTE flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Output drive capability 50 Ω transmission lines at 85°C
• Integrated 30 Ω termination resistors
• Diode clamps to VCC and GND on all inputs
• Input diodes to accommodate strong drivers
• Complies with JEDEC standard no. 8-1A
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
Part Name
Description
View
MFG CO.
18-bit registered driver with inverted register enable and 30Ω termination resistors (3-State)
Philips Electronics
18-bit registered driver with inverted register enable and 15 Ω termination resistors (3-State)
Philips Electronics
16-bit registered driver with inverted register enable and 30 Ω termination resistors (3-state)
NXP Semiconductors.
18-bit registered driver with inverted register enable (3-State)
Philips Electronics
16-bit registered driver with inverted register enable and 30Ω termination resistors (3-State)
Philips Electronics
18-bit registered driver with inverted register enable; 3-state
NXP Semiconductors.
18-bit registered driver with inverted register enable (3-State)
Philips Electronics
20-bit registered driver with inverted register enable and 30Ω termination resistors (3-State) ( Rev : V2 )
Philips Electronics
20-bit registered driver with inverted register enable and 30Ω termination resistors (3-State)
Philips Electronics
20-bit registered driver with inverted register enable and 15 Ω termination resistors (3-State)
Philips Electronics