ADT7301ARM-REEL7 View Datasheet(PDF) - Analog Devices

Part Name

Description

MFG CO.

ADT7301ARM-REEL7

13-Bit, ±0.5°C Accurate, MicroPower Digital Temperature Sensor in 6-Lead SOT-23

Analog Devices 

Preliminary Technical Data

ADT7301

SPECIFICATIONS

TA = TMIN to TMAX, VDD = 2.7 V to 5.5 V, unless otherwise noted. All specifications apply for –40°C to +150°C, unless otherwise stated

Table 1. A Grade Specifications

Parameter

TEMPERATURE SENSOR AND ADC

Accuracy

Temperature Resolution

Auto Conversion Update Rate, tR

Temperature Conversion Time

Thermal Time Constant2

SUPPLIES

Supply Voltage

Supply Current

Normal Mode

Shutdown Mode

Power Dissipation

Normal Mode (Average)

Shutdown Mode (Average)3

1 sps

10 sps

100 sps

DIGITAL INPUT4

Input High Voltage, VIH

Input Low Voltage, VIL

Input Current, IIN

Input Capacitance, CIN

DIGITAL OUTPUT5

Output High Voltage, VOH

Output Low Voltage, VOL

Output Capacitance, COUT

Min

Typ

Max Unit Test Conditions/Comments

VDD = +3.3 V (±10%) and 5 V (±10%)

TBD

±1 °C

TA = 0°C to 70°C.

TBD

±2 °C

TA = −20°C to +85°C.

TBD

±3 °C

TA = −40°C to +125°C.

TBD

±41 °C

TA = −40°C to +150°C.

0.03125

°C

1

sec Temperature measurement every 1 second

2

ms

2

sec

2.7

5.5 V

For Specified Performance

1.6

2.2 mA VDD = 3.3 V. Powered up and converting

190

300 µA VDD = 3.3 V. Powered up and not converting

1.6

2.2 mA VDD = 5 V. Powered up and converting

280

400 µA VDD = 5 V. Powered up and not converting

0.2

1

µA

VDD = 3.3 V.

0.2

1

µA

VDD = 5 V.

631

µW VDD = 3.3 V. Auto conversion update, tR.

1.41

mW VDD = +5 V. Auto conversion update, tR.

4.88

µW VDD = 3.3 V

7.4

µW VDD = 5 V

42.9

µW VDD = 3.3 V

65

µW VDD = 5 V

423

µW VDD = 3.3 V

641

µW VDD = 5 V

2.5

V

0.8 V

±1

µA

VIN = 0 V to VDD

10 pF All digital inputs

VDD − 0.3 V

ISOURCE = ISINK = 200 µA

0.4 V

IOL = 200 µA

50 pF

1 It is not recommended to operate the device at temperatures above +125°C for greater than a total of 5% (5,000 hours) of the lifetime of the device. Any exposure

beyond this limit will affect device reliability.

2 Thermal Time Constant is the time it takes for a starting temperature difference to change to 36.8% of it’s starting value. For example if the ADT7301 experienced a

thermal shock from 0°C to 100°C, it would take typically 2 secs for the ADT7301 to reach 63.2°C.

3 The ADT7301 is taken out of shutdown mode and a temperature conversion is immediately performed after this write operation. Once the temperature conversion is

complete the ADT7301 is put back into shutdown mode.

4 Guaranteed by design and characterization, not production tested.

5 Guaranteed by design and characterization, not production tested.

Specifications subject to change without notice

Rev. PrJ | Page 3 of 14

Share Link: