G3B View Datasheet(PDF) - OMRON Corporation
Part Name
Description
MFG CO.
G3B Datasheet PDF : 5 Pages
| |||
Safety Precautions
Refer to Safety Precautions for All Solid State Relays.
■ Precautions for Correct Use
Please observe the following precautions to prevent failure to
operate, malfunction, or undesirable effect on product performance.
The SSR case serves to dissipate heat. Install the relays so that they
are adequately ventilated. If poor ventilation is unavoidable, reduce
the load current to half.
■ Precautions for Safe Use
Connection
With an SSR for DC switching, the load can be connected to either
the positive or negative side of the SSR output terminals.
Protective Element
The SSR does not contain an overvoltage absorption element. Be
sure to connect an overvoltage absorption element when using the
SSR with an inductive load.
EMC Directive Compliance
1. AC-switching models comply with EMC Directives under the
following conditions
("-VD" models only).
3 m max.
Input G3B-VD Output
Load
Varistor: 470 V, 0.6 W
Varistor
Film capacitor: 1 µF, 250 VAC
Film capacitor
• Connect a varistor between the output terminals.
• Connect a film capacitor to the load power supply.
• The input cable must be less than 3 m.
2. DC-switching models comply with EMC Directives under the
following conditions
("-VD" models only).
Less than 10 m
Input G3BD-VD Output
Load
• The input cable must be less than 10 m.
G3B/G3BD
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
4
Share Link: 