CL90556C32413P View Datasheet(PDF) - Amphenol Aerospace
Part Name
Description
MFG CO.
CL90556C32413P Datasheet PDF : 3 Pages
| |||
1
www.amphenol-aerospace.com
Amphenol Commercial Class L
Product Data Sheet
PDS-235
MIL-DTL-22992
Wall Mount Receptacle
(power source)
The Amphenol Class “L” heavy duty connectors are now available in a lower cost
commercial version. The Class L meets the demands for heavy duty & heavy
power connectors that are critical for rugged environmental conditions.
Design features of Amphenol Class L provide:
• Greatest Capacity - Current ranges 40 to 200 amps, conductor sizes 6 to 4/0.
• Safety - Complete protection of personnel and equipment if connectors are
inadvertently disconnected under load.
• Foolproof Mating - Design incorporates voltage, current, frequency, phase and
grounding requirements
• Standardization - MIL-DTL-22992 Class L insert arrangements specify connector/
cable combinations for maximum reliability.
• Serviceable Contacts - Contacts are normally crimped to the cable before connector
assembly. No insertion tools required. Bushings are available to adapt smaller
diameter wires to larger contacts.
• Arc Quenching Design - Recessed socket contacts within the insert create an arc
suppressing chamber which protects the user when connectors are separated
under load.
• Programmed Coupling Sequence - Grounding and neutral contacts engage
before power contacts.
• Waterproof Design - A unique combination of grommets and seals
provides waterproofing in any condition - mated or unmated, capped or uncapped.
• Rugged Construction - Machined from high strength aluminum. Straight-line
attachment of accessories eliminates possibility of cable twisting or misalignment.
• Accessories - Supplied with all Class L connectors as indicated on the individual
connector descriptions. Replacement accessories may be ordered separately.
Straight Plug
Cable Connecting
Receptacle
without Coupling Ring
Condition Configuration
Description
Reference
Thermal Shock
Moisture
Resistance
(Cable mounted
connectors)
Durability
Salt Spray
(Corrosion)
Vibration
High Impact
Heat Rise (Class
L only)
Fluid Immersion
Water Immersion
Unmated
Five complete on hour temperature
cycles of –55°C to +125°C
MIL-STD-1344,
method 1003,
test condition A
Mated
Ten complete 24 hour cycles of +25°C to
+65°C temperature at 90% to 98%
humidity
MIL-STD-202,
method 106
Mated
Unmated
Mated
Mated
Mated
Unmated
Mated and
Unmated
500 complete mating/unmating cycles
48 hour exposure to atomized 5% saline
solution at +35°C
10 to 55 Hz, .06 inch total excursion in 1
minute cycles for 6 hours, 55 to 2000
Hz, 10G peak amplitude sweep
Nine hammer blows from 1, 3 and 5 feet,
three each in three axes on mounting
panel
Maximum rated DC current for four
hours at +25°C in still air
20 hours immersion in hydraulic fluid
and lubricating oil
4 hours immersion at 1 atmosphere
pressure differential
MIL-
DTL-22992
MIL-STD-1344,
method 1001
MIL-STD-1344,
method 2005
MIL-STD-202,
method 207
MIL-
DTL-22992
MIL-
DTL-22992
MIL-
DTL-22992
Wall Mount Plug with
Coupling Ring
(equipment end)
Contact Catalin Brandas for more
information at cbrandas@amphenol-aao.com
or call 607-563-5129
AmpAheeronspoacle
The Interconnection Leader
Call 800-678-0141 or visit us at www.amphenol-aerospace.com
Share Link: 