CS7410-CM View Datasheet(PDF) - Cirrus Logic

Part Name

Description

MFG CO.

CS7410-CM

CD/MP3/WMA Audio Controller

Cirrus Logic 

CS7410

Pin

Signal Name Type

Description

85

DAC_LN

O

GPO controlled by Mode bit 13

87

DAC_RP

O

GPO controlled by Mode bit 13

89

DAC_RN

O

GPO controlled by Mode bit 13

96

IEC958_O

B

GPIO controlled by Mode bit 14

Table 17. Redefined General Purpose Pins (Continued)

4.10

Power and Ground

Table 18 describes the power and ground pins. The CS7410 requires 3 different types of power supplies for

the PLLs, internal logic, and IO pins. The PLLs and internal logic use 1.8 V supply voltage. The IO pins use

3.3 V supply voltage. An optional separate supply can be used to provide clean 3.3 V to the Sigma-Delta

DACs digital output pads. It is recommended that you use good layout techniques to provide isolation be-

tween the supply types on the board. Contact Cirrus Logic applications engineering for layout guidelines.

Pin

1

2

14, 40, 73

12, 38, 71

19, 42, 64, 86

16, 44, 75

88

Signal Name

PLL_GND

PLL_1V8

CORE_GND

CORE_1V8

IO_GND

IO_3V3

DAC_3V3

Type

Description

Ground for internal PLLs

1.8V for internal PLLs

Ground for internal core logic

1.8V for internal core logic

Ground for Digital I/Os

3.3V for Digital I/Os

3.3V for Sigma Delta DAC Digital I/Os

Table 18. Power and Ground

36

DS553PP1

Share Link: