QL4009-1PF100I View Datasheet(PDF) - QuickLogic Corporation

Part Name

Description

MFG CO.

QL4009-1PF100I

9,000 Usable PLD Gate QuickRAM ESP Combining Performance, Density and Embedded RAM

QuickLogic Corporation 

QL4009 QuickRAM Data Sheet Rev B

Pin Descriptions

Table 12: Pin Descriptions

Pin

Function

Description

TDI/RSI

Test Data In for JTAG /RAM init.

Serial Data In

Hold HIGH during normal operation. Connects to serial

PROM data in for RAM initialization. Connect to VCC if

unused.

TRSTB/RRO

Active low Reset for JTAG /RAM

init. reset out

Hold LOW during normal operation. Connects to serial

PROM reset for RAM initialization. Connect to GND if

unused.

TMS

Test Mode Select for JTAG

Hold HIGH during normal operation. Connect to VCC if

not used for JTAG.

TCK

TDO/RCO

Test Clock for JTAG

Hold HIGH or LOW during normal operation. Connect to

VCC or ground if not used for JTAG.

Test data out for JTAG /RAM init.

clock out

Connect to serial PROM clock for RAM initialization. Must

be left unconnected if not used for JTAG or RAM

initialization.

STM

Special Test Mode

Must be grounded during normal operation.

I/ACLK

High-drive input and/or array

network driver

Can be configured as either or both.

I/GCLK

High-drive input and/or global

network driver

Can be configured as either or both.

I

High-drive input

Use for input signals with high fanout.

I/O

Input/Output pin

Can be configured as an input and/or output.

VCC

VCCIO

Power supply pin

Input voltage tolerance pin

Connect to 3.3 V supply.

Connect to 5.0 V supply if 5 V input tolerance is required,

otherwise connect to 3.3 V supply.

GND

Ground pin

Connect to ground.

GND/THERM Ground/Thermal pin

Available on 456-PBGA only. Connect to ground plane on

PCB if heat sinking desired. Otherwise may be left

unconnected.

Ordering Information

QL 4009 - 1 PF100 C

QuickLogic device

QuickRAM device

part number

Speed Grade

0 = Quick

1 = Fast

2 = Faster

3 = Faster

*4 = Wow

Operating Range

C = Commercial

I = Industrial

M = Military

Package Code

PL68 = 68-pin PLCC

PF84 = 84-pin PLCC

PF100 = 100-pin TQFP

* Contact QuickLogic regarding availabliity

•

•

14

•

•

www.quicklogic.com

•

•

© 2002 QuickLogic Corporation

Share Link: