RT9013-33PQW View Datasheet(PDF) - Richtek Technology
Part Name
Description
MFG CO.
RT9013-33PQW
Richtek Technology
RT9013-33PQW Datasheet PDF : 12 Pages
| |||
RT9013
Preliminary
Parameter
Logic-Low Voltage
EN Threshold
Logic-High Voltage
Enable Pin Current
Power Supply
Rejection Rate
f = 100kHz
Line Regulation
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
Symbol
Test Conditions
VIL
VIH
IEN
PSRR
ΔVLINE
TSD
ΔTSD
IOUT = 300mA
VIN = (VOUT+0.5) to 5.5V,
IOUT = 1mA
Min Typ Max Units
0
--
0.6
V
1.6 --
5.5
--
0.1
1
μA
--
-40
--
dB
-- 0.01 0.2 %/V
-- 170 --
°C
--
30
--
Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for
stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational
sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may
remain possibility to affect device reliability.
Note 2. Devices are ESD sensitive. Handling precaution recommended.
Note 3. The device is not guaranteed to function outside its operating conditions.
Note 4. θJA is measured in the natural convection at TA = 25°C on a low effective thermal conductivity test board of JEDEC 51-3
thermal measurement standard. The case position of θJC is on the exposed pad for the WDFN-6L 2x2 packages.
Note 5. Quiescent, or ground current, is the difference between input and output currents. It is defined by IQ = IIN - IOUT under no
load condition (IOUT = 0mA). The total current drawn from the supply is the sum of the load current plus the ground pin
current.
Note 6. The dropout voltage is defined as VIN -VOUT, which is measured when VOUT is VOUT(NORMAL) - 100mV.
Note 7. Regulation is measured at constant junction temperature by using a 2ms current pulse. Devices are tested for load
regulation in the load range from 10mA to 500mA.
www.richtek.com
4
DS9013-05 August 2007
Share Link: 