MPC911 View Datasheet(PDF) - Motorola => Freescale
Part Name
Description
MFG CO.
MPC911 Datasheet PDF : 4 Pages
| |||
MPC911
AC CHARACTERISTICS
0°C
25°C
70°C
Symbol
Characteristic
Min
Typ
Max Min
Typ
Max Min
Typ Max Unit
Condition
tPLH
tPHL
tskew
Propagation Delay to Output HSTL 1.4
IN (differential)
PECL 1.3
Within-Device Skew
Part-to-Part Skew (Diff)
2.0
2.3 1.6
1.9
2.0 1.4
250
900
1.9
2.4
1.8
1.9
2.1
1.5
250
800
2.3
2.6
ns
2.0
2.3
250
ps
800
Note 1
Note 2
VPP
Minimum Input Swing
PECL_CLK
600
600
600
mV
Note 3
VCMR
Common Mode Range
PECL_CLK
VCC
–1.5
VCC VCC
–0.8 –1.5
VCC VCC
–0.8 –1.5
VCC
V
–0.8
Note 4
tr/tf
Output Rise/Fall Time
500
800 1200 500
800 1200 500
800 1200 ps
600 1200 1800 600 1200 1800 600 1200 1800
20%–80%
1. The differential propagation delay is defined as the delay from the crossing points of the differential input signals to the crossing point of the
differential output signals.
2. The within-device skew is defined as the worst case difference between any two similar delay paths within a single device.
3. VPP(min) is defined as the minimum input differential voltage which will cause no increase in the propagation delay. The VPP(min) is AC limited
for the MPC911 as a differential input as low as 50 mV will still produce full HSTL levels at the output.
4. VCMR is defined as the range within which the VIH level may vary, with the device still meeting the propagation delay specification. The VIL level
must be such that the peak to peak voltage is less than 1.0 V and greater than or equal to VPP(min).
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
TIMING SOLUTIONS
3
BR1333 — REV 5
MOTOROLA
Share Link: 