LPC2290 View Datasheet(PDF) - Philips Electronics
Part Name
Description
MFG CO.
LPC2290
Philips Electronics
LPC2290 Datasheet PDF : 41 Pages
| |||
Philips Semiconductors
LPC2290
16/32-bit ARM microcontrollers with external memory interface
6.10.1 Features
• Direction control of individual bits.
• Separate control of output set and clear.
• All I/O default to inputs after reset.
6.11 10-bit A/D converter
The LPC2290 contains single 10-bit successive approximation analog to digital
converter with eight multiplexed channels.
6.11.1 Features
• Measurement range of 0 V to 3 V.
• Capable of performing more than 400,000 10-bit samples per second.
• Burst conversion mode for single or multiple inputs.
• Optional conversion on transition on input pin or Timer Match signal.
6.12 CAN controllers and acceptance filter
The LPC2290 contains two CAN controllers. The Controller Area network (CAN) is a
serial communications protocol which efficiently supports distributed real-time control
with a very high level of security. Its domain of application ranges from high speed
networks to low cost multiplex wiring.
6.12.1 Features
• Data rates up to 1 Mbit/s on each bus.
• 32-bit register and RAM access.
• Compatible with CAN specification 2.0B, ISO 11898-1.
• Global Acceptance Filter recognizes 11 and 29-bit Rx identifiers for all CAN buses.
• Acceptance Filter can provide FullCAN-style automatic reception for selected
Standard identifiers.
6.13 UARTs
The LPC2290 contains two UARTs. One UART provides a full modem control
handshake interface, the other provides only transmit and receive data lines.
6.13.1 Features
• 16 byte Receive and Transmit FIFOs.
• Register locations conform to ‘550 industry standard.
• Receiver FIFO trigger points at 1, 4, 8, and 14 bytes
• Built-in baud rate generator.
• Standard modem interface signals included on UART1.
9397 750 12874
Preliminary data
Rev. 01 — 09 February 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
20 of 41
Share Link: 