CY2291I View Datasheet(PDF) - Cypress Semiconductor
Part Name
Description
MFG CO.
CY2291I Datasheet PDF : 14 Pages
| |||
CY2291
Switching Characteristics, Commercial 5.0V
Parameter
Name
Description
Min.
Typ.
Max.
Unit
t1
Output Period Clock output range,
CY2291
5V operation
10
(100 MHz)
13000
ns
(76.923 kHz)
CY2291F
11.1
(90 MHz)
13000
ns
(76.923 kHz)
Output Duty
Cycle[11]
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT > 66 MHZ
40%
50%
60%
Duty cycle for outputs, defined as t2 ÷ t1[12]
fOUT < 66 MHZ
45%
50%
55%
t3
Rise Time
Output clock rise time[13]
3
5
ns
t4
Fall Time
Output clock fall time[13]
2.5
4
ns
t5
Output Disable Time for output to enter three-state mode after
Time
SHUTDOWN/OE goes LOW
10
15
ns
t6
Output Enable Time for output to leave three-state mode after
Time
SHUTDOWN/OE goes HIGH
10
15
ns
t7
Skew
Skew delay between any identical or related out-
puts[3, 12, 15]
< 0.25
0.5
ns
t8
CPUCLK Slew Frequency transition rate
1.0
20.0
MHz/
ms
t9A
Clock Jitter[14] Peak-to-peak period jitter (t9A Max. – t9A min.),%
of clock period (fOUT < 4 MHz)
t9B
Clock Jitter[14] Peak-to-peak period jitter (t9B Max. – t9B min.)
(4 MHz < fOUT < 16 MHz)
t9C
Clock Jitter[14] Peak-to-peak period jitter
(16 MHz < fOUT < 50 MHz)
t9D
Clock Jitter[14] Peak-to-peak period jitter
(fOUT > 50 MHz)
<0.5
1
%
<0.7
1
ns
<400
500
ps
<250
350
ps
t10A
Lock Time for Lock Time from Power-Up
CPLL
<25
50
ms
t10B
Lock Time for Lock Time from Power-Up
UPLL and SPLL
<0.25
1
ms
Slew Limits
CPU PLL Slew Limits CY2291
8
100
MHz
CY2291F
8
90
MHz
Notes:
11. XBUF duty cycle depends on XTALIN duty cycle.
12. Measured at 1.4V.
13. Measured between 0.4V and 2.4V.
14. Jitter varies with configuration. All standard configurations sample tested at the factory conform to this limit. For more information on jitter, please refer to the
application note: “Jitter in PLL-Based Systems.”
15. CLKF is not guaranteed to be in phase with CLKA-D, even if it is referenced off the same PLL.
Document #: 38-07189 Rev. *A
Page 7 of 14
Share Link: 