Bourns® Model 7004C NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installations. The 7004C supplies station protection and test access points and can be confi gured for a maximum of two POTS lines and one 1740-xx coax protector. The 7004C features convenient cable knockouts and generous working space for wire management.
Features ■ Accepts POTS lines & coaxial protector ■ Manufactured from high-impact resistant, ultraviolet-desensitized, fl ame retardant plastic ■ Optional sealed switching jacks with Insulation Displacement Connectors (IDC) ■ Subscriber lockable with Telco override ■ Convenient ground attachment ■ UL Listed per UL 497 (File: E53117)
MIL-DTL-38999 III subminiature cylindrical connectors
The TV-CTV connectors are in accordance with MIL-DTL-38999 series III standard. These connectors offer the highest performance capabilities for both general duty and severe environment applications.
Main features • Shell material - Composite - Aluminium - Marine bronze - Stainless steel • Finish - Olive drab cadmium plating - Nickel plating - Passivation (for steel versions) • 9 shell sizes from 09 to 25 • Contacts - More than 60 arrangements of contacts, including high density versions - Size 8, 10, 12, 16, 20, 22 D contacts - Signal, power, twinax, coaxial contacts, MOV, optical termini • Contact protection - 100% scoop-proof shell - Interfacial seal ensures sealing around each contact and prevents electrolytic erosion • EMI/RFI protection - Shell to shell bottoming - Grounding fingers on the plug shell • Quick coupling completely mates and self locks in a 360° turn of the coupling nut • Performs sine and random vibration tests by an anti-decoupling device • Receptacles are intermountable with MIL-DTL-38999 series I standard (same panel drilling)
The ITT Cannon D Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution to any interconnect problem. Ideally suited for
both commercial/industrial applications and military/aerospace applications, ITT Cannon D Subminiature
connectors have found worldwide acceptance in a multitude of applications ranging from office equipment to satellites.
■ Features, Benefits and Applications ■ MEMS oscillator with LVCMOS/LVTTL compatible output ■ 1-110 MHz frequency range ■ Frequency stability as low as ±20 PPM ■ Typical current consumption of 6.1 mA in active mode ■ Standby or output enable modes ■ 1.8V, 2.5V - 3.3V supply voltage ■ SoftEdgeTM configurable rise/fall time for driving higher loads or EMI reduction. ■ Four industry-standard packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm ■ All-silicon device with outstanding reliability of 2 FIT, 10x improvement over quartz-based devices ■ Ultra short lead time ■ Ideal for consumer electronics: video, set top boxes, HDTV, DVR, scanners, printers, IP camera, etc. ■ Ideal for high-speed serial protocols: Ethernet, USB, SATA, SAS, Fibre Channel, Firewire, PCI Express
Features ■ Frequency range from 1 MHz to 200 MHz ■ Center Spread Modulation: ±0.25%, ±0.5%, ±1% ■ Down Spread Modulation: -0.5%, -1%, -2%; spread disable option available ■ Power down or output enable option available ■ Frequency stability: ±25 ppm, ±50 ppm and ±100 ppm (Spread = OFF) ■ Operating voltage: 1.8V or 2.5 or 3.3 V; other voltages up to 3.63 V (contact SiTime) ■ Operating temperature range: Industrial, -40°C to +85°C, Extended Commercial, -20°C to +70°C ■ Industry-standard packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm x mm ■ Pb-free, RoHS and REACH compliant ■ High drive option: 30pF load (contact factory) ■ 30 ps Ultra-low cycle-to-cycle jitter
Applications ■ Set-top boxes and LCD displays ■ Scanners, printers and copiers ■ Interface controllers and graphics cards ■ PCI, CPU and memory buses ■ Routers and modems
FEATURES ● Bright nickel plated brass housing ● Low profile styling ● Sealed to IP67 ● Domed lens available ● Suitable for high vibration applications ● Internal reverse protection diode fitted as standard in all voltage models.
FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • AEC-Q101 qualified • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication.