NCP1421 View Datasheet(PDF) - ON Semiconductor
Part Name
Description
View to exact match
NCP1421 Datasheet PDF : 14 Pages
| |||
NCP1421
PIN FUNCTION DESCRIPTIONS
Pin
Symbol
Description
1
FB
Output Voltage Feedback Input.
2
LBI/EN
Low−Battery Detector Input and IC Enable. With this pin pulled down below 0.5 V, the device is disabled and
enters the shutdown mode.
3
LBO
Open−Drain Low−Battery Detector Output. Output is LOW when VLBI is < 1.20 V. LBO is high impedance in
shutdown mode.
4
REF
1.20 V Reference Voltage Output, bypass with 1.0 mF capacitor. If this pin is not loaded, bypass with 300 nF
capacitor; this pin can be loaded up to 2.5 mA @ VOUT = 3.3 V.
5
BAT
Battery input connection for internal ring−killer.
6
GND
Ground.
7
LX
N−Channel and P−Channel Power MOSFET drain connection.
8
OUT
Power Output. OUT also provides bootstrap power to the device.
MAXIMUM RATINGS (TC = 25°C unless otherwise noted.)
Rating
Symbol
Value
Unit
Power Supply (Pin 8)
VOUT
−0.3, 5.5
V
Input/Output Pins (Pin 1−5, Pin 7)
VIO
−0.3, 5.5
V
Thermal Characteristics
Micro8 Plastic Package
Thermal Resistance Junction−to−Air
PD
RqJA
520
mW
240
_C/W
Operating Junction Temperature Range
TJ
−40 to +150
_C
Operating Ambient Temperature Range
TA
−40 to +85
_C
Storage Temperature Range
Tstg
−55 to +150
_C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values
(not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage
may occur and reliability may be affected.
1. This device contains ESD protection and exceeds the following tests:
Human Body Model (HBM) ±2.0 kV per JEDEC standard: JESD22−A114. *Except OUT pin, which is 1k V.
Machine Model (MM) ±200 V per JEDEC standard: JESD22−A115. *Except OUT pin, which is 100 V.
2. The maximum package power dissipation limit must not be exceeded.
PD
+
TJ(max) *
RqJA
TA
3. Latchup Current Maximum Rating: ±150 mA per JEDEC standard: JESD78.
4. Moisture Sensitivity Level: MSL 1 per IPC/JEDEC standard: J−STD−020A.
http://onsemi.com
3
Share Link: 