RP10-4812DEW(2005) View Datasheet(PDF) - RECOM Electronic GmbH
Part Name
Description
View to exact match
RP10-4812DEW Datasheet PDF : 5 Pages
| |||
POWERLINE
DC/DC-Converter
RP10-S_DEW
Series
Specifications (typical at nominal input and 25°C unless otherwise noted)
Vibration
Relative Humidity
Case Material
Base Material
Potting Material
Conducted Emissions
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
Dimensions
MTBF (see note 2)
10-55Hz, 2G, 30 Min. along X, Y and Z
5% to 95% RH
Nickel-Coated copper
Non-conductive black plastic
Epoxy (UL94-V0)
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
27g
50.8 x 25.4 x 10.2mm
1.976 x 106 Hours
Notes :
1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.
Operation under no-load condition will not damage these devices, however they may not meet all listedspecification.
2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
3. Simulated source impedance of 12uH. 12uH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is standard, no suffix (Ex. RP10-2405SEW)
Negative logic ON/OFF is marked with suffix-N (Ex. RP10-2405SEW/N).
8. Heat sink is optional and P/N: 7G-0020A.
9. The RP10-xxxxEW version (incl. M2 option) does not carry the UL certification.
10.M2 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.
11. See application notes for EMI-filtering.
214
April-2005
www.recom-international.com
Share Link: 