HMC934LP5E View Datasheet(PDF) - Hittite Microwave
Part Name
Description
View to exact match
HMC934LP5E Datasheet PDF : 6 Pages
| |||
v01.1211
Outline Drawing
HMC934LP5E
400° ANALOG PHASE SHIFTER
1 - 2 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Package Information
Part Number
Package Body Material
HMC934LP5E
RoHS-Compliant Low Stress Injection Molded Plastic
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Lead Finish
100% Matte Sn
MSL Rating
MSL1 [2]
Package Marking [1]
H934
XXXX
Pin Descriptions
Pin Number
1 - 5, 8 - 13,
15 - 17, 20 - 32
Function
N/C
Description
No connection required. These pins may be connected to RF/DC
ground without affecting performance.
Interface Schematic
7, 18
GND
Ground: Backside of package has exposed metal ground paddle
that must be connected to ground thru a short path. Vias under
the device are required.
6
RFIN
This pin is AC coupled and matched to 50 Ohms.
19
RFOUT
This pin is AC coupled and matched to 50 Ohms.
Phase shift control pin. Application of a voltage between 0 and
14
Vctl
13 volts causes the transmission phase to change. The DC
equivalent circuit is a series connected diode and resistor.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Share Link: 