DF11CZ-30DS-2V(52) View Datasheet(PDF) - HIROSE ELECTRIC
Part Name
Description
View to exact match
DF11CZ-30DS-2V(52) Datasheet PDF : 14 Pages
| |||
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF11 Seriesq2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
sFeatures of DF11 Insulation Displacement Machine
(Single Core Punching Full Automatic ID Machine AM700/DF11)
q 5 Major Features of ID Machine AM700/DF11
1. Perform the multi-harness.
2. The setup time has been widely reduced. (10 minutes maximum)
Low cost Multi-harness
Data storage
Setup in 10 minutes Half space
3. Space saving design.
(About half space compared with the conventional machine)
4. Minimize initial cost with low cost.
5. The harness data can be saved in the floppy disk and easily
changed.
sPoints
Since the DF11 insulation displacemention allows double rows ID with a single part, the harness service is completed with
machine connection only.
sProduct Specifications
Rating
AWG #22 to #26 : 2A Operating Temperature Range -30 to 85ç Note 2
Current rating Crimping Wire size
AWG #28
: 1A Operating Humidity Range 40 to 80%
(Note 1)
AWG #30
: 0.5A
Insulation Displacement Wire size
AWG #26
: 1A Storage Temperature Range -10 to 60ç Note 3
Voltage rating Crimping
250V AC Insulation Displacement 100V AC Storage Humidity Range 40 to 70%
Rating
UL-CSA Safety Standard Approved Specification
AWG #22
Current rating
Wire size
AWG #24 to #28
AWG #30
Voltage rating
30V AC
: 2A
: 1A
: 0.5A
sUL·CSA Safety Standard File No.
UL :E52653
CSA :LR95109
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance 30m ohms max.
100mA
4. Single Insertion/Extraction Force 0.3N (30gf) min., 4.4N(450gf) max.
Measured by the square steel-made pin of 0.5±0.002mm
5. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
7. Temperature Cycle
(-55ç: 30 minutes ➝ 5 to 35ç: 5 to 15 minutes
Contact resistance: 30m ohms max. Insulation resistance: 1000M ohmsmin.
(-85ç: 30 minutes ➝ 5 to 35ç: 5 to 15 minutes) 5 cycles
8. Durability (Mating/un-mating) Contact resistance: 30m ohms max.
Tin plated: 30 cycles
Gold plated:50 cycles
Flow:
Manual soldering:
260ç for 10 seconds
9. Resistance to Soldering heat No deformation of components affecting performance.
Reflow:
300ç for 2 seconds
Manual soldering:
At the recommended temperature profile 300ç for 3 seconds
Note 1: Current rating of header is 2A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
104
Share Link: 