VV6501
Functional Description
3.4.4
Suspend mode
Suspend mode is the lowest possible power consumption mode with current < 100 µA. In suspend
mode the external clock is gated inside the device and the analogue blocks are powered down.
The sensor is set into suspend mode by driving the SUSPEND pin high.
To achieve the lowest possible power consumption, the clock source should also be turned OFF for
the duration of the SUSPEND mode.
3.4.5
Sensor soft reset
All the serial interface registers may be reset to their default values by setting the “soft reset” bit (bit
2) of setup register 0. This causes the sensor to enter low power mode.
27/60