SMV1705-040 View Datasheet(PDF) - Skyworks Solutions
Part Name
Description
View to exact match
SMV1705-040 Datasheet PDF : 8 Pages
| |||
DATA SHEET • SMV1705 SERIES VARACTORS
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMV1705 group of
varactors are provided in Table 2. Electrical specifications are
provided in Table 3. Typical capacitance values are listed in
Table 4. Typical performance characteristics of the SMV1705
varactors are illustrated in Figures 1 and 2.
The SPICE model for the SMV1705 varactors is shown in Figure 3
and the associated model parameters are provided in Table 5.
Package Dimensions
Package dimensions are shown in Figures 4 to 8 (even numbers),
and tape and reel dimensions are provided in Figures 5 to 9 (odd
numbers).
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SMV1705 series of varactors are rated to Moisture Sensitivity
Level 1 (MSL1) at 260 C. They can be used for lead or lead-free
soldering. For additional information, refer to the Skyworks
Application Note, Solder Reflow Information, document number
200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Table 2. SMV1705 Series Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Reverse voltage
VR
12
V
Forward current
IF
20
mA
Power dissipation
PDIS
250
mW
Operating temperature
TOP
–55
+125
C
Storage temperature
TSTG
–55
+150
C
Electrostatic discharge:
ESD
Charged Device Model (CDM), Class 3
Human Body Model (HBM), Class 1C
Machine Model (MM), Class B
1000
V
1000
V
200
V
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SMV1705 Series Electrical Specifications (Note 1)
(TOP = 25 C, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Reverse current
IR
VR = 8 V
<0.01
20
Capacitance
CT
F = 1 MHz :
VR = 1 V
VR = 4 V
17.3
18.3
19.3
5.3
6.1
6.6
Capacitance ratio
CTR
CT @ 1 V/ CT @ 4 V
2.8
3.0
Series resistance
RS
F = 470 MHz, VR = 1 V
0.32
Breakdown voltage
VBR
IR = 10 μA
12
Note 1: Performance is guaranteed only under the conditions listed in this table.
Units
nA
pF
pF
–
Ω
V
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
August 7, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200076N
Share Link: 