Static Electrical Characteristics
Table 3. Static Electrical Characteristics (continued)
All characteristics are for the analog chip only. Refer to the 68HC908EY16 datasheet for characteristics of the microcontroller
chip. Characteristics noted under conditions 9.0 V ≤ VSUP ≤ 16 V, -40°C ≤ TJ ≤ 125°C unless otherwise noted. Typical values
noted reflect the approximate parameter mean at TA = 25°C under nominal conditions unless otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
Window Watchdog Configuration Terminal (WDCONF)
External Resistor Range
REXT
10
—
100
kΩ
Watchdog Period Accuracy with External Resistor (Excluding Resistor
WDCACC
Accuracy) (17)
-15
—
%
15
LIN Physical Layer
LIN Transceiver Output Level
Recessive State, TXD HIGH, IOUT = 1.0 µA
Dominant State, TXD LOW, 500 Ω External Pullup Resistor
V LIN_REC
VSUP -1
—
V LIN_DOM
—
—
Normal Mode Pullup Resistor to VSUP
R PU
20
30
Stop, Sleep Mode Pullup Current Source
IPU
—
2.0
Output Current Shutdown Threshold
IOV-CUR
50
75
Output Current Shutdown Delay
IOV-DELAY
—
10
Leakage Current to GND
VSUP Disconnected, VBUS at 18 V
Recessive State, VSUP 8.0 V to 18 V, VBUS 8.0 V to 18 V, VBUS ≥ VSUP
GND Disconnected, VGND = VSUP, VBUS at -18 V
IBUS
—
1.0
0
3.0
-1.0
—
V
—
1.4
60
kΩ
—
µA
150
mA
—
µs
µA
10
20
1.0
LIN Receiver
Receiver Threshold Dominant
Receiver Threshold Recessive
Receiver Threshold Center
Receiver Threshold Hysteresis
VSUP
V BUS_DOM
—
—
0.4
V BUS_REC
0.6
—
—
V BUS_CNT
0.475
0.5
0.525
V BUS_HYS
—
—
0.175
Notes
17. Watchdog timing period calculation formula: PWD = 0.991 * REXT+0.648 (REXT in kΩ and PWD in ms).
Analog Integrated Circuit Device Data
Freescale Semiconductor
908E624
9