IDT72V3643(2015) View Datasheet(PDF) - Integrated Device Technology
Part Name
Description
View to exact match
IDT72V3643
(Rev.:2015)
(Rev.:2015)
Integrated Device Technology
IDT72V3643 Datasheet PDF : 28 Pages
| |||
IDT72V3623/72V3643 CMOS 3.3V SyncBiFIFOTM WITH BUS-MATCHING
256 x 36, 1,024 x 36
COMMERCIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS OVER OPERATING FREE-AIR
TEMPERATURE RANGE (Unless otherwise noted)(1)
Symbol
Rating
Commercial
Unit
VCC
Supply Voltage Range
–0.5 to +4.6
V
VI(2)
Input Voltage Range
–0.5 to VCC+0.5
V
VO(2)
Output Voltage Range
–0.5 to VCC+0.5
V
IIK
Input Clamp Current (VI < 0 or VI > VCC)
±20
mA
IOK
Output Clamp Current (VO = < 0 or VO > VCC)
±50
mA
IOUT
Continuous Output Current (VO = 0 to VCC)
±50
mA
ICC
Continuous Current Through VCC or GND
±400
mA
TSTG
Storage Temperature Range
–65 to 150
°C
NOTES:
1. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these
or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect
device reliability.
2. The input and output voltage ratings may be exceeded provided the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min. Typ. Max. Unit
VCC(1) Supply Voltage
3.0
3.3
3.6
V
VIH High-Level Input Voltage
2
— VCC+0.5 V
VIL
Low-Level Input Voltage
—
—
0.8
V
IOH High-Level Output Current
—
—
–4
mA
IOL
Low-Level Output Current
—
—
8
mA
TA
Operating Temperature
0
—
70
°C
NOTE:
1. For 10ns (100 MHz operation), VCC = 3.3V +/-0.15V;TA = 0° to +70°C; JEDEC JESD8-A compliant.
ELECTRICAL CHARACTERISTICS OVER RECOMMENDED OPERATING
FREE-AIR TEMPERATURE RANGE (Unless otherwise noted)
Symbol
Parameter
Test Conditions
VOH
Output Logic "1" Voltage
VCC = 3.0V,
IOH = –4 mA
VOL
Output Logic "0" Voltage
VCC = 3.0V,
IOL = 8 mA
ILI
Input Leakage Current (Any Input)
VCC = 3.6V,
VI = VCC or 0
ILO
Output Leakage Current
VCC = 3.6V,
VO = VCC or 0
ICC2(3) Standby Current (with CLKA and CLKB running) VCC = 3.6V,
VI = VCC - 0.2V or 0
ICC3(3) Standby Current (no clocks running)
VCC = 3.6V,
VI = VCC - 0.2V or 0
CIN(4)
Input Capacitance
VI = 0,
f = 1 MHz
COUT(4) Output Capacitance
VO = 0,
f = 1 MHZ
NOTES:
1. For 10ns speed grade only: Vcc = 3.3V +/-0.15V; TA = 0° to +70°C; JEDEC JESD8-A compliant.
2. All typical values are at VCC = 3.3V, TA = 25°C.
3. For additional ICC information, see Figure 1, Typical Characteristics: Supply Current (ICC) vs. Clock Frequency (fS).
4. Characterized values, not currently tested.
5. Industrial temperature range is available by special order.
IDT72V3623
IDT72V3643
Commercial
tCLK = 10(1), 15ns
Min. Typ.(2) Max. Unit
2.4
—
—
V
—
—
0.5
V
—
—
±10
μA
—
—
±10
μA
—
—
5
mA
—
—
1
mA
—
4
—
pF
—
8
—
pF
6
Share Link: