ICM-108BPA View Datasheet(PDF) - Unspecified
Part Name
Description
View to exact match
ICM-108BPA Datasheet PDF : 20 Pages
| |||
ICM108B 1.3 million pixel CMOS sensor
Data Sheet V 1.1 November, 2002
Key Parameters
• Number of pixels: 1280x1024
• Number of physical pixels: 1,333,860, (1290x1034)
• Frame rate: 30/15/10/5/4/3/2/1 fps
• Sub-sampling quarter (1/4) and quarter-quarter (1/16) mega pixel resolutions for higher frame rate
• Pixel size: 6 µm x 6 µm
• Sensor area: 7.68 mm x 6.144 mm
• Input clock: 6 MHz crystal, or external clock source of 6, 12, 24, 48, or 96 MHz through PLL or
bypass PLL
• Main clock frequency: 48 MHz; on-chip 11 bit ADC clock: 96MHz (2x of main clock frequency),
for 30 fps operation.
• Mode exposure time: 31.25 µs (@ 30 fps, 1 line). Maximum exposure time ~ 60 s @ X1 mode
(1 fps), 65535 lines
• RGB gain: 1/256 to 64 for individual Bayer pattern pixels depending on register setting.
• Sensitivity: 1.0 V/lux-sec (5200 K light source, 650 nm IR cutoff filter)
• Quantum Efficiency: 38 % (555 nm)
• Dynamic Range: 55 dB (relative to noise floor = temporal noise + quantization noise); 45 dB
(relative to total noise)
• Fill Factor: 36%
• S/N Ratio (temporal noise): 45 dB @ 75% full signal level
• S/N Ratio (total noise): 40 dB @ 75% full signal level
• Sensitive to infrared illumination source
• Power supply: 3.3V
• Power requirement: <100mA (@30fps) and <60mA (@15fps)
• Standby mode power: < 50uA
• Package: Plastic LCC48
©2000, 2001, 2002 IC Media Corporation & IC Media Technology Corp.
11/22/2002
page 3
COMPANY CONFIDENTIAL
Share Link: 