HA16107FP View Datasheet(PDF) - Renesas Electronics

Part Name

Description

View to exact match

HA16107FP

PWM Switching Regulator for High-performance Voltage Mode Control

Renesas Electronics 

HA16107P/FP, HA16108P/FP

PWM Switching Regulator for

High-performance Voltage Mode Control

REJ03F0141-0400

(Previous: ADE-204-012C)

Rev.4.00

Jun 15, 2005

Description

The IC products in this series are primary control switching regulator control IC’s appropriate for obtaining stabilized

DC voltages from commercial AC power.

These IC’s can directly drive power MOS FET’s, they have a timer function built in to the secondary overcurrent

protection, and they can perform intermittent operation or delayed latched shutdown as protection operations in unusual

conditions. They can be used to implement switching power supplies with a high level of safety due to the wide range

of built-in functionality.

Functions

• 6.45 V reference voltage

• Triangle wave generator

• Error amplifier

• Under voltage lockout protector

• PWM comparator

• Pulse-by-pulse current limitting

• Timer-latch current limitting (HA16107)

• ON/OFF timer function (HA16108)

• Soft start and quick shutdown

• Output circuit for power MOS FET driving

Features

• Operating frequencies up to a high 600 kHz

• Built-in pre-driver circuit for driving power MOS FET

• Built-in timer latch over-current protection function (HA16107)

• The OCL enables intermittent operation by an ON/OFF timer for prevention of secondary overcurrent. (HA16108)

• The UVL function (under voltage lockout) is applied to both Vin and Vref.

• ON/OFF reset: an auto-reset function which is based on the time constant of an external capacitor and observation

of drops in Vin.

• Since the over-voltage protection function OVP (the TL pin) only observes voltage drops in Vin, it is possible to use

the OVP and ON/OFF pin for independent purposes.

• Built-in 34 V Zener diode between Vin and ground.

Rev.4.00 Jun 15, 2005 page 1 of 39

Share Link: