AT27C1024-12JC View Datasheet(PDF) - Atmel Corporation
Part Name
Description
View to exact match
AT27C1024-12JC Datasheet PDF : 9 Pages
| |||
Rapid Programming Algorithm
A 100 µs PGM pulse width is used to program. The
address is set to the first location. VCC is raised to 6.5V and
VPP is raised to 13.0V. Each address is first programmed
with one 100 µs PGM pulse without verification. Then a ver-
ification / reprogramming loop is executed for each
address. In the event a word fails to pass verification, up to
10 successive 100 µs pulses are applied with a verification
after each pulse. If the word fails to verify after 10 pulses
have been applied, the part is considered failed. After the
word verifies properly, the next address is selected until all
have been checked. VPP is then lowered to 5.0V and VCC
to 5.0V. All words are read again and compared with the
original data to determine if the device passes or fails.
8
AT27C1024
Share Link: 