datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADN2882 View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADN2882 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Data Sheet
4.25 Gbps, 3.3 V Low Noise,
Transimpedance Amplifier
ADN2882
FEATURES
GENERAL DESCRIPTION
Bandwidth: 3.5 GHz
The ADN2882 is a 3.3 V high gain SiGe transimpedance
Input noise current density: 8 pA/√Hz
amplifier (TIA) which converts the small signal current of a
Optical sensitivity
photo detector to a large differential voltage output. The
−22.0 dBm1
ADN2882 features a typical 475 nA input-referred noise,
−20.4 dBm2
enabling an optical sensitivity of −22 dBm (0.85 A/W PIN).
Differential transimpedance: 3700 V/A
Power dissipation: 80 mW
Differential output swing: 260 mV p-p
Input overload current: 5.6 mA p-p
On-chip RSSI function
E Low frequency cutoff: 12 kHz
On-chip PD filter: RF = 200 Ω, CF = 20 pF
Die size: 0.7 mm × 1.2 mm
T APPLICATIONS
4.25 Gbps optical receivers
GbE/FC optical receivers
E SFF-8472-compliant receivers
L PIN/APD-TIA receiver optical subassemblies
With a bandwidth of 3.5 GHz, the ADN2882 allows a data rate
operation up to 4.25 Gbps. Typical power dissipation is 80 mW.
To facilitate the assembly in small form factor packages, such as
TO-46 headers, the ADN2882 provides an on-chip RC filter
(200 Ω, 20 pF) and features a 12 kHz low frequency cutoff
without using an external capacitor. An on-chip RSSI circuit,
which generates a voltage proportional to the average photo-
diode current, is available for power monitoring and assembly
alignment.
The ADN2882 is available in die form. With a chip area of
1.2 mm × 0.7 mm, the TIA layout is optimized for TO-Can-
based packages.
1 Based on 1550 nm PIN, CD = 0.5 ± 0.10 pF, responsivity = 0.85 A/W,
ER = 9 dB, PRBS 231 − 1 at 4.25 Gbps, BER < 10−12.
2 Calculated result based on an 850 nm PIN, CD = 0.5 ± 0.15 pF,
responsivity = 0.48 A/W, ER = 9 dB, at 4.25 Gbps, BER < 10−12.
O FUNCTIONAL BLOCK DIAGRAM
3.3V
VCCFILTER VCC
SFILTER
BIN
200
50
50
1100
OUT
OUTB
O 20pF
0.85V
5mA
RSSI
GND
GND CAP
Figure 1.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2005–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]