DF21-20P-0.6PTB View Datasheet(PDF) - HIROSE ELECTRIC
Part Name
Description
View to exact match
DF21-20P-0.6PTB Datasheet PDF : 6 Pages
| |||
sProduct Specifications
Ratings
Current rating
Voltage rating
Wire size
AWG #40: 0.3 A
AWG #36: 0.5 A
50 V AC
Operating temperature range
Operating humidity range
Storage temperature range
Storage humidity range
-35ç to 85ç (Note 1)
20% to 80%
-10ç to 60ç (Note 2)
40% to 70% (Note 2)
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
Specifications
500M ohms min.
No flashover or insulation breakdown
100m ohms max.
4. Vibration
No electrical discontinuity of 1µs or more.
5. Humidity
6. Temperature cycle
Contact resistance of 100m ohms max., insulation
resistance of 50 M ohms min.
Contact resistance of 100m ohms max., insulation
resistance of 50 M ohms min.
Condition
Measured at 100 V DC
Conduction of 150 V AC applied for 1 minute
Measured at 100 mA
Frequency of 10 to 55 Hz, single amplitude of 0.75 mm, in 3
directions, 2 hours
Temperature of 40±2ç, humidity of 90% to 95%, left standing
for 96 hours
(-55ç : 30minutes /5 to 35ç : 2 to 3minutes /85ç : 30minutes
/5 to 35ç: 2 to 3minutes ) for 5 cycles
7. Durability
Contact resistance of 100m ohms max.
30 cycles (mating/unmating)
8. Resistance to
Reflow heat
9. Resistance to
Soldering heat
No melting of the resin parts that will affect performance
No deformation of the insulator parts affecting performance.
Reflow: at the recommended temperature profile, Solder: at a
soldering iron temperature of 300ç for 3 seconds
Solder bond: Within 5 seconds at 270ç max., Within 30 seconds at 200ç
min. Hand soldering: Soldering iron temperature 300°C, 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
sMaterials
Item
Receptacles
Plugs
Pull-out tab
Part
Insulator
Contacts
Metal fittings
Insulator
Contacts
Metal shell
Pull-out tab
Material
LCP
Phosphor bronze
Phosphor bronze
LCP
Phosphor bronze
Phosphor bronze
Stainless steel
Finish
Black
Gold plating
Solder plating
Black
Gold plating
Solder plating
----------
Remarks
UL94V-0
----------
----------
UL94V-0
----------
----------
----------
sOrdering information
qReceptacles/Plug
DF 21 - * P - 0.6 SD - GND
1
23
4
5
6
1 Series name
: DF21
2 Number of contacts : 20, 30, 40
3 Connector type
S : Single-row receptacle
P : Single-row plug
4 Contact pitch : 0.6 mm
5 Termination section
C : Crimping plug
V : Straight SMT
SD : Fine coaxial cable
6 Plug mounting parts
GND : Metal shell-required
PTB : Pull-out tab-optional
2
Share Link: 