LM7MS623 View Datasheet(PDF) - Sharp Electronics

Part Name

Description

View to exact match

LM7MS623

DEVICE SPECIFICATION for Passive Matrix Monochrome LCD Module (640X240 dots)

Sharp Electronics 

SHARP

SPEC No.

LC99404

MODEL No.

LM7MS623

PAGE

1

0 Precautions

1) Industrial (Mechanical) design of the product in which this LCD module will be incorporated must be made

so that the viewing angle characteristics of the LCD may be optimized.

This module’s viewing angle is illustrated in Fig.1.

8 yMIN.<viewingangle<0

yMAX.

(For the specific values of 0 y MIN., and 8 y MAX., refer to the table 8 )

Please consider the optimum viewing conditions according to the purpose when installing the module.

Viewing direction + 6 y

y=O ’ (Normal line)

Panel surface

Fig.1 Definition of viewine angle

2) This module should be installed using mounting holes at the two corners of modules.

When installing the module, pay attention and handle carefully not to allow any undue stress such as twist or

bend.

3) Since the front polarizer is easily damaged. Please pay attention not to scratch on its face.

It is recommended to use a transparent acrylic resin board or other type of protective panel on the surface of

the LCD module to protect the polarizer, LCD panel, etc..

4) If the surface of the LCD panel is required to be cleaned, wipe it swiftly with cotton or other soft cloth.

If it is not still clear completely, blow on and wipe it.

5) Water droplets, etc. must be wiped off immediately since they may cause color changes, staining, etc., if it

remained for a long time.

6) Since LCD is made of glass substrate, dropping the module or banging it against hard objects may cause

cracking or fragmentation.

Share Link: